Limewashing
Limewashing for harled and rendered walls
Limewash is the traditional finish for lime harling, lime render and old stone. It is made from lime and water, goes on in thin coats, and lets the wall breathe, so it does not trap moisture the way a masonry paint can. We limewash houses, steadings, churches and estate buildings across Moray, Aberdeenshire and the Highlands. To discuss your project, call Dean on 07966 225120 or use the Contact page.
Why limewash suits old buildings
Limewash is vapour open, so damp can still dry out through the wall. It is made from the same material as the lime harling or plaster beneath it, so the two work together. It has a soft, slightly changing finish that modern paint cannot copy, and it can be tinted with lime-fast pigments to match the colours a building has always had.
How we apply it
The wall is checked first. Loose material and old failed paint are dealt with, cracks are repaired, and the surface is dampened so the limewash does not dry too fast. We then brush on several thin coats, letting each one take up before the next, rather than one thick coat that will craze and flake. The finished wall is protected while it cures, because limewash hardens slowly as it takes up carbon dioxide from the air.
Limewash or silicate paint
On lime harling we can finish with limewash or with a breathable silicate paint. Limewash gives the softer, more traditional look and needs recoating every few years. Silicate paint lasts longer between coats. We will advise which suits your building and how much maintenance you want to take on.
Before you limewash
Limewash is a finish, not a repair. If the harling is cracked, hollow or cement-patched, or the stonework needs repointing, that comes first. See our lime harling and lime pointing pages.
Before: patchy, stained harling and flaking paint on the stone surrounds.
After: re-limewashed, even and breathable.