Guide
What lime plaster is, why old buildings need it, and what good lime plastering involves, explained by the people who do the work.
Lime plaster is made from lime, sand and water, with animal hair added to the coarser coats. It does not set the way gypsum plaster does. It hardens slowly as it takes carbon dioxide back from the air, and that slow cure gives a plaster that is firm, slightly flexible and open to moisture.
Solid stone and brick walls take in damp and let it out again as the weather changes. Lime plaster allows that to happen. Cement and gypsum plasters, and plastic-based paints, can shut moisture in, and that trapped damp is behind much of the salt, mould and flaking plaster we are called in to repair.
Good lime plaster goes on in layers, not in one thick coat. A rough first coat grips the wall and fills the worst hollows. A middle coat makes the surface flat and true. A thin, fine final coat gives the finished face. Each layer is scratched so the next one can bond, and each is left until it is ready for the next. Hurrying this is the commonest cause of cracks and failures.
On masonry, the wall has to be sound, clean and free of old cement or paint that would stop the plaster bonding. On timber laths, the first coat is pushed through the gaps so it forms nibs behind the timber and holds itself up. Many ceilings and partitions in older houses are built this way, and repairing them well means matching the original method.
Fresh lime plaster must not dry out fast. Strong sun, wind, frost or too much heat can ruin a good job, so we manage the conditions and sometimes dampen the surface lightly. Timing depends on the wall, the thickness and the weather, so we judge it on site rather than by a fixed number of days.
To keep the wall breathable, finish it with limewash or a mineral paint, not an ordinary plastic paint. Limewash can go on once the plaster is firm. Mineral paints need the plaster to have cured for longer first.
Lime mixed hot from quicklime and sand is an older method that is making a comeback, both for repairs and for ecological new builds.
Is lime better than gypsum?
Different, not always better. Lime suits old solid walls. Gypsum is fine in many modern buildings.
Can it go straight onto stone or brick?
Yes, once the wall is sound and prepared.
Can I paint it?
Yes, with the right paint at the right time.
Get in touch
Tell us about the building and we will say honestly whether lime is the right answer.
Call Dean on 07966 225120